Learn more at www.RMDbillet.com.
RMD Billet: 507-348-8877.

TOP

3 GUYZ Customs has introduced a low cost Standard Sprocket Brake Kit that features a ground finish rotor with an anodized finish caliper body. The sprocket brake rotor is CNC manufactured from ground 400 series heat-treated stainless steel using a large swept braking area to allow use of industry available brake pads. At $595 retail, this kit includes frame mounting tabs and everything needed to mount it in place for your favorite project. Available in both 530 and 630 monster pitch and four tooth sizes! Most orders ship from stock.

Learn more at www.3GUYZ.com.
3 Guyz Customs: 503-645-4898.

TOP

American Performance Cycles' new softail chopper offers a load of visual and performance perks for the money. A 114-inch wheelbase and spot-on rake and trail make this bike easy to maneuver and a kick to ride. The High Roller features right-side drive with an S & S engine, Baker 6-speed, billet closed primary, forged one-piece Forge-Tec or 80-spoke wheels and tons more billet and chrome. APC currently has four distinct models with various versions of each one (chopper, drop seat, FLH style and pro-street) that are all reasonably priced and that can be ordered with a variety of options for individual buyers. The High Roller starts at only $28,995 and is carb and DOT approved, as are all APC models.

Learn more at www.apccycles.com.
American Performance Cycles: 702-314-5272.

TOP

With their sleek chromed look and quality workmanship, Kendon's custom petcock and carburetor fittings are a great way to top off your fuel delivery system. The rad styling features vertical push-pull action for easy on-off of your fuel supply, as well as high flow stainless, clear-coated, wire braided fuel lines with polished stainless fittings. Hose lengths are available for all configurations - no more hose clamps, and Kendon's fittings match Mikuni and S & S Carburetors.

See more at www.Kendonusa.com. Kendon: 800-847-8618.

TOP

MHT Motorsports new line of custom wheels includes a totally cool, 3D-forged Devil's Slide design. Killer three-dimensional lines combined with high-quality materials put these road worthy rims in a class above. Devil's Slide rear rims can be ordered in diameters from 17 to 21 inches and widths from 3.5 to 14 inches. Front wheels jump from 18 inches all the way to 26 inches in diameter and widths from 2.15 to 4 inches. Finished in Mirror Deep Chrome, MHT offers wheels for standard and RSD, and for single, dual or no disc applications.

For complete details call MHT or visit them online at www.MHTwheels.com. MHT Motorsports: 800-378-0007.

TOP

Custom Cycle Control Systems is upgrading its Simplified Air Suspension (SAS) with a remote filtered air breather to ensure that it stays contaminant free! Installation is as easy as routing the hose and filter away from road debris and water and then cutting to length. The SAS system features an internal compressor with a four-bolt and three-wire harness for the switch-on power. Other benefits include a housing machined from 6061 billet aluminum that is hard anodized for longevity, adjustable dampening and ride-height and pneumatic seals that resist leaks. Order Part #SAS-99 for 1999 and earlier EVO models, and Part #SAS-00 for 2000 and up Twin Cam models.

For more details, go to www.CustomCycleControls.com.
Custom Cycle Control Systems: 866-438-2129.

TOP

Pearson Customs' springer front end features brass parts and is 100 percent TIG welded inhouse. No cheap import stuff here. Every springer is made for each customer's individual frame, so you get a kick-ass looking springer that is going to handle great! These upgraded springers have all washers, bushings and nuts made from brass. Just $1,500 plus shipping and $685 additional for chrome. Contact Pearson Customs regarding your specifications.

For more information on this and other products, go to www.PearsonCustoms.com.
Pearson Customs: 952-233-2670.

TOP

American Wire Wheel has added stock style replacement spoke sets for Harley-Davidson® spoke wheels to their line of aftermarket wheels and related accessories for the V-twin marketplace. The replacement spoke sets are made of high-strength stainless steel that is swaged and cut to the precise length for each application. The spokes are then bent to the proper angle, threaded and polished to an ultra-high luster. Current available applications include OE 40 spoke 16 by 3-inch rims (early star hub and late style lace patterns), and 21 by 2.15-inch rims with wide hubs. Each set comes with 40 spokes, and 40 chrome plated nipples.

Learn more at www.americanwire.com.
American Wire Wheel: 800-635-9760.

TOP

Revolution Manufacturing recently unveiled new wheels made from carbon fiber with applications for virtually all V-twin bikes including V-Rods. These wheels will substantially reduce weight and improve the handling of your bike. Sizes include 18 by 3.5 inch, 19 by 3 inch and 21 by 2.15 inch for the front, and 18 by 3.5 inch, 18 by 5.5 inch and 18 by 8.5 inch for the rear. The front wheels weigh a mere 6 lbs. with hubs and bearings, and the rears weigh just 8 lbs. for the 18 by 5.5 inch and just 9 lbs. for the 18 by 8.5 inch designs. "By lowering the rotating mass and moving what is left inward to the hub, all aspects of vehicle dynamics are improved," Michael Kamalian, CEO of the company, points out. For more information, contact Revolution Manufacturing online. Dealer inquiries are welcome.

Learn more at www.RevolutionSpeed.com.
Revolution Manufacturing: 770-420-9191.

TOP